HPE Cisco MDS 9216A Multilayer Fabric Switch

  • Marca: HP
  • Categoría:
  • Número de referencia: A7558A
  • EAN: 0829160706474
Sharing a consistent architecture with the Cisco MDS 9500 Series, the Cisco MDS 9216A combines multilayer intelligence with a modular chassis, making it the industry’s most intelligent and flexible fabric switch.

Precios comerciales

Distribuidor Producto Número de referencia Stock Actualizado Precio
EET Europarts

Cisco MDSS 9216A Fabric

 A7558AR Regístrese gratis y vea el stock

Precios al por menor

Comerciante Producto Estado Actualizado Precio
Amazon New 1.399,00 €
Amazon New 1.399,00 €

Productos relacionados

Descripción

The Cisco MDS 9216A Multilayer Fabric Switch shares a consistent architecture with the MDS 9500 series Directors and offers the same multilayer intelligence in a modular fabric switch. Intelligent features include multi-protocol support (Fibre Channel, iSCSI, FCIP), Virtual SANs (VSANs), embedded diagnostics and role-based security. With these innovations, companies can build highly scalable, available storage networks with comprehensive security and unified management. The MDS 9216A is fully populated out of the box with sixteen 1 and 2 Gb auto-sensing Fibre Channel ports. An expansion slot allows for the addition of an MDS 9000 Storage Networking Module available in 1, 2, 4 and 10 Gb versions and in port increments of 8, 12, 16, 24, 32, or 48 ports, for up to 64 Fibre Channel ports or for FC/IP connectivity.

Especificaciones

Puertos e Interfaces
Puertos de entrada y salida (E/S)16 to 64, 10/4/2/1-Gbps Fibre Channel ports, up to 10 1-Gbps Ethernet ports; Port speed: 10/4/2/1-Gbps auto-sensing, optionally configurable
Red
Bidireccional completo (Full duplex)No
Protocolos
Protocolos de red compatiblesFC-PH, Revision 4.3 (ANSI/INCITS 230-1994); FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1-1996); FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999); FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997); FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998); FC-PI, Revision 13 (ANSI/INCITS 352-2002); FC-FS, Revision 1.9 (ANSI/INCITS 373-2003) [the final revision is 1.9, not 1.7]; FC-AL, Revision 4.5 (ANSI/INCITS 272-1996); FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999); FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003); FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001); FC-SW-3, Rev. 6.6 (ANSI/INCITS 384-2004); FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001); FC-GS-4, Rev. 7.91 (ANSI/INCITS 387-2004); FC-BB, Revision 4.7 (ANSI/INCITS 342-2001); FC-BB-2, Rev. 6.0 (ANSI/INCITS 372-2003); FCP, Revision 12 (ANSI/INCITS 269-1996); FCP-2, Revision 8 (ANSI/INCITS 350-2003); FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001); FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003); FC-VI, Revision 1.84 (ANSI/INCITS 357-2002); FC-FLA, Revision 2.7 (INCITS TR-20-1998); FC-PLDA, Revision 2.1 (INCITS TR-19-1998); FC-Tape, Revision 1.17 (INCITS TR-24-1999); FC-MI, Revision 1.92 (INCITS TR-30-2002); FC-SP, Revision 1.6; FC-DA, Revision 3.1; IP over Fibre Channel (RFC 2625); Extensive IETF-standards based TCP/IP, SNMPv3, and Remote Monitoring (RMON) MIBs; Class of Service: Class 2, Class 3, Class F; Fibre Channel standard port types: E, F, FL, B; Fibre Channel enhanced port types: SD, ST, TE, TL
Anchura de banda
Ancho de banda máximo del puertoPort speed: 10/4/2/1-Gbps auto-sensing, optionally configurable; Buffer credits: Up to 255 per port; Ports per chassis: 16 to 64, 10/4/2/1-Gbps Fibre Channel ports, up to 10 1-Gbps Ethernet ports; Ports per rack: Up to 896; PortChannel: Up to sixteen ports
Detalles técnicos
Ventilación200 linear feet per minute (lfm) through system fan assembly. Cisco recommends that you maintain a minimum air space of 6 inches (16 cm) between walls and the chassis air vents and a minimum separation of 12 inches (30.5 cm) between two chassis to prevent overheating
Características técnicasThe expansion slot on the Cisco MDS 9216A allows for the addition of any Cisco MDS 9000 Storage Networking Modules, so users can add additional Fibre Channel ports and additional IP ports
VSANs allow more efficient storage network utilisation by creating hardware-based isolated environments within a single physical SAN fabric or switch. VSANs allow the cost of SAN infrastructure to be shared among more users, while ensuring absolute segregation of traffic
The Cisco MDS 9216A supports hardware-based FCIP compression to maximize the effective WAN bandwidth of SAN extension solutions. The Cisco MDS 9216A achieves up to a 30:1 compression ratio, with typical ratios of 2:1 over a wide variety of data sources
The Cisco MDS 9216A uses the open-standard FCIP protocol to break the distance barrier of current Fibre Channel solutions and enable interconnection of SAN islands over extended distances
Condiciones ambientales
Humedad relativa sin funcionamiento (no condensable)10-95%
Requisitos del sistema
Sistemas operativos compatiblesMDS SAN-OS Release 1.3(2) or later
Condiciones ambientales
Intervalo de temperatura operativa0 - 40 °C
Intervalo de temperatura de almacenaje-40-75 °C
Intervalo de humedad relativa para funcionamiento10-90%
Intervalo de humedad relativa durante almacenaje10-95%
Húmedad relativa10-90%
Altitud de funcionamiento2000m
Peso y dimensiones
Peso32 kg
Otras características
Plataforma de gestiónOut-of-band 10/100 Ethernet port
Dimensiones (Ancho x Profundidad x Altura)43.99 x 57.56 x 13.34 cm
Ancho de bandaPort speed: 10/4/2/1-Gbps auto-sensing, optionally configurable; Buffer credits: Up to 255 per port; Ports per chassis: 16 to 64, 10/4/2/1-Gbps Fibre Channel ports, up to 10 1-Gbps Ethernet ports; Ports per rack: Up to 896; PortChannel: Up to sixteen ports
Software incluidoCisco MDS OS, Cisco Fabric Manager
Requisitos de energía100 to 240 VAC; 50 to 60 Hz
Nivel de servicioClass 2, Class 3, Class F
Gestión de rendimientoOut-of-band 10/100 Ethernet port
Fuente de alimentación100 to 240 VAC; 50 to 60 Hz
DiagnósticosPower-On-Self-Test (POST) diagnostics; online diagnostics; internal loopbacks; SPAN; FC trace route; FC ping; FC debug; Cisco Fabric Analyzer; Syslog; online system health; port-level statistics
Ventilación200 linear feet per minute (lfm) through system fan assembly. Cisco recommends that you maintain a minimum air space of 6 inches (16 cm) between walls and the chassis air vents and a minimum separation of 12 inches (30.5 cm) between two chassis to prevent overheating
Puertos de entrada y salida (E/S)16 to 64, 10/4/2/1-Gbps Fibre Channel ports, up to 10 1-Gbps Ethernet ports; Port speed: 10/4/2/1-Gbps auto-sensing, optionally configurable
Humedad relativa sin funcionamiento (no condensable)10-95%
Características técnicasThe expansion slot on the Cisco MDS 9216A allows for the addition of any Cisco MDS 9000 Storage Networking Modules, so users can add additional Fibre Channel ports and additional IP ports
VSANs allow more efficient storage network utilisation by creating hardware-based isolated environments within a single physical SAN fabric or switch. VSANs allow the cost of SAN infrastructure to be shared among more users, while ensuring absolute segregation of traffic
The Cisco MDS 9216A supports hardware-based FCIP compression to maximize the effective WAN bandwidth of SAN extension solutions. The Cisco MDS 9216A achieves up to a 30:1 compression ratio, with typical ratios of 2:1 over a wide variety of data sources
The Cisco MDS 9216A uses the open-standard FCIP protocol to break the distance barrier of current Fibre Channel solutions and enable interconnection of SAN islands over extended distances
Ancho de banda máximo del puertoPort speed: 10/4/2/1-Gbps auto-sensing, optionally configurable; Buffer credits: Up to 255 per port; Ports per chassis: 16 to 64, 10/4/2/1-Gbps Fibre Channel ports, up to 10 1-Gbps Ethernet ports; Ports per rack: Up to 896; PortChannel: Up to sixteen ports